0 items in the shopping cart
  • No products in the cart.

PDP-E800DSP

Amplifier Processors

PDP-E800DSP

8-Channel DSP Digital Amplifier

$1,299.00

Not available online

SKU: PDP-E800DSP OWNERS MANUAL: PDP-E800DSP

Alpine introduces the all-new PDP-E800DSP Digital DSP amplifier. This amazing all-in-one solution allows sound upgrading for virtually any vehicle with its incredible versatility and connectivity options.

Featuring 6 input channels (both pre-amp and speaker level), as well as up to 8 fully configurable output channels allow for a very wide range of system applications and flexibility. Tune your sound with a professional 240-band Parametric EQ, 8 channel digital time correction, as well as a 8 channel digital crossover.

For system setup, use the Alpine PC software to connect wirelessly or via USB to the PDP-E800DSP. The very intuitive and easy-to-use software allows for full control over all settings and displays all data with it’s stylish graphical user interface.

The compatible Alpine Remote Control for PDP-E800DSP app (available for both Android and iPhone) lets you control your DSP amp on the go and includes the most important functions, such as master-volume, subwoofer level, source selection, pre-set recall and more.

The PDP-E800DSP is the perfect solution especially for OEM upgrades, where the factory radio can’t be replaced by an after-market solution to get better sound. The Alpine DSP amp simply adds-on to the existing OEM system, allowing you to build any sound system around your factory system.

Connection Versatility 

The PDP-E800DSP can be added-on to virtually any factory or aftermarket car system to build the perfect sound. Connect the DSP amp to your factory system through the 6-channel speaker-level inputs or alternatively, use the 6-channel pre-amp inputs (RCA).

Build Your Speaker System

You can freely configure the 8 output channels. Each channel delivers 100 Watts @ 4 Ohms and can be configured to be used as a tweeter, mid-range, centre or woofer channel. You can also use two channels in parallel for a powerful 200 Watts subwoofer channel.

Extensive Sound Tuning 

The PDP-E800DSP delivers a professional sound studio straight out of the box. A 240-band Parametric EQ lets you adjust the sound in great detail. You also get 8-channel digital time correction and an 8-channel digital crossover for perfect channel setup while analog routing allows functionality such as summarising several channels to create a centre channel.

Wireless Remote Control App

Download the Alpine Remote Control app for your iPhone or Android smartphone to control all key functions on the go: select input sources, adjust the systems master volume and the subwoofer level, select sound pre-sets and more. The app is a free download from the Google Play store or the Apple app store.

240 Band Parametric EQ and X-Over

The Parametric EQ is very easy to use: 30 bands per channel can be simply adjusted with sliders in real-time. The display gives you visual feedback of your adjustments. You can also set the digital X-Over for all 8 channels separately.

8-Channel Digital Time Correction

Use the graphical user interface to adjust the time delay for each speaker / channel separately. You can adjust the delay by centimeters, inches or milliseconds. You can also delay whole groups of channels.

Analog Routing

With this tool you can setup which input channel is routed to which output channel (in percent). This allows for the ability of creating a centre channel out of 2 front channels.

Source Gain Adjustment 

You can adjust the gain of each analogue input from -15dB to 0dB to achieve the perfect input sensitivity of your source. By adjusting the source gain you can personalise the sound to your preference.

RUX-KNOB

Bass Knob Compatible

Alpine’s RUX-KNOB.2 can be used to control the subwoofer level or the master volume of your PDP-E800DSP. This can be easily installed somewhere in the dashboard for quick access to the subwoofer’s output.

Wireless Audio Playback

If you use an Android phone, you can use the micro USB connection on the Alpine PDP-E800DSP to transfer and enjoy lossless audio files in full bandwidth. You can also connect your phone to the DSP amp using WiFi.

Class D Technology

The PDP-E800DSP uses Class-D amplification technology, this means once an analogue input signal is converted to digital, it remains fully digital throughout the entire processing and amplification stage.

Start-Stop Engine Compatible

The PDP-E800DSP will remain in full operation if your car is running on start-stop mode – meaning no unintended system shut-down when you stop at an intersection or in a stop-and-go situation.

Alpine PDP-E800DSP Introduction

Features

  • 6 high-level inputs for OEM system integration
  • 6 analog Pre-Amp inputs (RCA) for aftermarket head unit connectivity
  • 1 digital TOSLINK/SPDIF input
  • Up to 8 speaker outputs with high power rating
  • 110dB signal-to-noise ratio (digital input)
  • Channel separation > 75dB
  • USB Device input for DSP setup by PC
  • Wireless connection with separate module (amp setup) for PC only, or wireless audio streaming (smart phone or PC))
  • Class-D amplifier with fully digital audio path
  • ADCs by Burr Brown
  • Remote app for iOS and Android with basic control functions (Master level, Sub level, Preset recall, source selection)
  • Pre-amp output (copy from channel 8, for external sub woofer amp)

Specifications

Amplifier

  • BurrBrown A/D conversion
  • Full digital audio path
  • High output power capability
  • Total power 700 Watt RMS at 4 Ω
  • 100 Watt per channel at 4 Ω
  • 120 Watt per channel at 2 Ω
  • 200 Watt at 2 Ω (2 channels in parallel mode)
  • Advanced diagnostics for each output channels (shortcut, overheat, clipping)
  • Start-Stop Engine compatible
  • Load Capability: 4 – 2 Ω
  • Parallelised output supported

DSP

  • Latest Analog Device chip (ADAU1452)
  • Up to 8 speaker outputs with independent adjustable output level
  • Independent or linkable setups for all output channels
  • Delay on each channel up to 14,57ms, 0.01msec steps
  • 30-band Graphic Equaliser per channel with configurable frequency, Q (from 1 up to 15) and Gain (-10dB /+10 dB)
  • Digital X-Over for each channel (HP, LP, BP) 6/12/18/24dB/30dB, type of filter (Butterworth, Bessel, Chebyshev) selectable
  • Phase Inversion (0,180)
  • Master Volume (0 – 42dB)
  • Sub control (0 – 15 dB)
  • Possibility to save/load up to 6 presets on DSP
  • Settings can be secured by certificates
  • Free adjustable analog routing (example: channel mixing for center channel or 3-way input signal)
  • EQ ON/OFF possible (for each channel)
  • Delay grouping for easier TCR adjustment (up to 4 groups possible)
  • TCR ON/OFF for each channel possible
  • TCR help calculation for beginners
  • Overview page for all settings
  • Live monitor (for battery voltage and amp temperature)
  • Turn ON by signal or wire
  • Alpine RUX-KNOB2.0 ready (master volume or sub level)
  • Additional gain on analog input (+6; +9db ). For sources with lower pre-amp level than 2 Volts

Expert Sound Tuning 

Download the Alpine Sound Lab software for the PDP-E800DSP and install it on your PC (compatible with Windows 7, 8 and 10).

Connect your PC via USB cable or wirelessly through WiFi to the Alpine PDP-E800DSP to start tuning your audio system.

Click Here to download the Alpine Sound Lab Software for PDP-E800DSP.

Want more information?
locate your nearest authorised Alpine dealer